HS 170T Servo System&Energy-saving Injection Molding Machine
Hong speed is the brand of high-efficiency precision hydraulic injection molding machine, and the model clamping force covers 110T-530T. Committed to automotive precision parts, medical, food packaging and other industries, high quality, precision, high efficiency, energy saving is the purpose of every Hongsheng people, creating greater value for customers is the goal of each of our Hongsheng people.
1. Servo motor
The AC permanent magnet servo motor used in the injection molding machine adopts a hollow shaft spline direct connection structure. If there is a large displacement requirement for the pump station, the double shaft output structure can be adopted.
2. Fast clamping
The highly optimized clamping unit makes the high-speed opening and closing mold more stable and effectively shortens the cycle time. The optimized clamping mechanism is designed with a pressure center template structure. The clamping force acts directly on the mold, and the dimensional deformation of the cavity is reduced, which improves the molding precision of the product.
3. High rigidity template
The template stress distribution is uniform, the deformation is small, and the precision of the product is effectively improved; the pressure center template structure is adopted to effectively improve the precision of the product.
4. New joint lubrication structure
Standard graphite steel sleeve (copper sleeve), steel sleeve, copper sleeve surface embedded solid lubricant is a non-metal anti-wear material, which greatly improves the lubrication effect of crankshaft and tie rod, increases the life of parts, and makes the whole The machine is more tidy.
5. High performance high strength screw
High-quality synthetic steel for screw and sol cylinders, optional options for special materials or bimetallic design
1. Reasons for the white point of the transparent product and its solution.
The white point of the transparent product is caused by the entry of cold glue into the product or by dust inside the material.
Increase the temperature of the nozzle, add cold wells, and keep the raw materials in place to prevent dust from entering.
2. Injection molding machine hydraulic oil requirements:
(1) Appropriate viscosity and good viscosity-temperature performance
(2) Good lubricity and rust resistance;
(3) Good chemical stability, not easy to vaporize into colloid;
(4) Good foaming;
(5) Corrosive to the parts and seals;
(6) The ignition point (flash point) requires that the freezing point be low.