Product details
Thermal Shock Chamber is used to test the resistance ability of specimen in extreme high and low temperature cycling environment, which is test the chemical change or physical damage due to heat expansion and cold contraction in short period. The machine is applicable to metal, plastic, rubber ,electronic or other materials. It is used to temperature test of electrician materials, household appliances, automobiles, motorcycles, chemicals, and other product components and materials.
Control Instrumentation
The chamber will be fitted with a microprocessor Self tune PID type dual loop Temperature Controller/Programmer with a PT- 100 sensor for measurement and control and indication of temperature. This can used to program different test cycles as required by the test standards, and can be used to program basket dwell times (up to 999hrs) and number of transfer cycles. The programmer/controller produced from Korea.
Features
●A flexible cabling tube(for monitoring or powering samples) that comes out the side, rather than a moving pipe that sticks out the top.
●A cool-down mode allows the operator to safely remove the samples quickly after a test is completed.
●An option for a window makes checking on the samples easier.
Site requirements:
●Main Power: North American standard 208V (alternate international power: 200V, 220V, 380V, or 415V)
●Cooling water supply
●Quiet operation with sound levels below 65dB
Available options:
●Paperless recorder with color display and CompactFlash storage
●Strip chart recorder
●Computer interface RS-232
●Viewing window
●Additional STT thermocouple inputs
●Additional flexible cable tube
Main Features
1. New perfect precise technology of exterior design, external box adopts cold rolled sheet double sided electrostatic resin high temperature coating, inner box uses the international SUS#304 heat resistant and cold resistant stainless steel seal welding.
2. Thermal insulation layer uses refractory grade high strength PU foam thermal insulation material. Refrigeration system introduction of Japan, Germany advanced energy saving refrigeration control technology, save 20% of energy than conventional devices.
3. Control system and the control circuit adopts imported brand parts.
Technical Parameters of Thermal Shock Test Chamber
Model |
GTS-056 |
GTS-087 |
GTS-126 |
||||
Test zone size W*H*D(mm) |
400*350*440 |
500*350*500 |
600*350*600 |
||||
Exterior chamber size W*H*D(mm) |
1500*2050*2120 |
1600*2050*2220 |
1700*2050*2320 |
||||
Preheat temperature range |
+200℃ |
||||||
Precool temperature range |
-60℃ -75℃ |
||||||
Test temperature range |
+60℃~+150℃; -10℃~-50℃;-10℃~-65℃ |
||||||
Performance |
Temperature fluctuation |
±2℃ |
|||||
Temperature recover time |
Within 5 minutes |
||||||
Heat up time |
℃ |
150 |
150 |
150 |
|||
min |
30 |
35 |
40 |
||||
Cool down time |
℃ |
-50 -65 |
-50 -65 |
-50 -65 |
|||
min |
60 70 |
70 80 |
80 90 |
||||
Material |
Exterior chamber material |
Stainless steel plate+ Power Coated |
|||||
Inner chamber material |
SUS#304 stainless steel plate |
||||||
Insulation |
PU& Fiberglass wool |
||||||
System |
Wind Circulation |
Sirocco fan |
|||||
Heating system |
SUS#304 stainless steel high-speed heater |
||||||
Cooling |
Imported compressor, finned type evaporator, air-cooling condenser |
||||||
Controller |
LCD touch panel controller |
||||||
Other Components |
Vaccum glass inspection window, cable port(50mm), control status |
||||||
Safty Devices |
Overheating circuit-breaker,compressor overload protection,control |
||||||
Power Supply |
AC3φ380V 60/50Hz |
||||||
Customization |
Customization of inner chamber size, tempreture&humidity range,ect. |
Grande Electronics is one of the largest high quality thermal shock test chamber manufacturers and suppliers in China and also known as one of the famous chamber brands. Our discount product is mainly featured by good performance and flexibility and low price. Welcome to order the customized and cheap chamber made in China with our factory.